Builders Corner
-
March 30, 2005 10:11 PM By Rods n Customs by Leon
Bench bleeding is one of those things that a lot of people avoid doing, Bench bleeding the Master Cyl will make bleeding the system much easier and more assuring.
So for those who have never seen it done, or that would like to know whats involved, I tho
-
March 27, 2005 07:50 PM By Rods n Customs by Leon
Ok, heres the start of the console that I will be making for Roddy`s 55 Chevy Truck, This will be a two piece console the dash section will incorporate A/C vents with floor lighting under it and the radio mounted on top.
The lower section that will come
-
March 21, 2005 11:32 PM By Rods n Customs by Leon
Steves truck finally has paint on it after all of the the work we have in it, This is a nice looking purple, I think it will fit the smooth side panels, shaved door hindges & handles really well. Once the body is bolted down we will then refit the front e
-
March 30, 2005 11:26 PM By Rods n Customs by Leon
Now we have some paint on the 72 It`s time to start some minor assembly and wait to cure enough to color sand and buff. The buffing is comming along pretty slow, This color seams to show things worse than black, so it`s taking a little more work to get it
-
March 05, 2005 07:37 PM By Rods n Customs by Leon
Well after some major scratches and paint flaws roddy has decided to bring this truck to us for some repainting and full assembly. We will also be building a custom console, Installing a Vintage Air, Sound system, 4 link setup and a few Custom Body Mods,
-
March 05, 2005 02:45 PM By Rods n Customs by Leon
This is an update on Blackwells 72 Pickup, As you can see, this one is going to be an awsome Truck
-
February 27, 2005 06:45 PM By Rods n Customs by Leon
Leon Brought this truck in for a complete suspension upgrade. It will get a new Hiedt IFS w/ 2" Dropped spindles, A hiedt Rear leaf kit, Ididit Colum, Power brakes and I think a new Rear Mount Gas Tank. In doing this we we will retain the 5 1/2 Bolt patte
-
February 22, 2005 12:29 AM By Rods n Customs by Leon
This project has be coming along, Most all of the body work is done and now we are welding in some pieces of the floor.
-
February 21, 2005 11:48 PM By Rods n Customs by Leon
This truck is planned to be a complete turn key project that will take approx 12 weeks. This will also include the full custom interior, Custom changes to the bed, And a completely new Paintjob
-
February 14, 2005 01:46 AM By Rods n Customs by Leon
This is one of those Favor projects for a friend, This is his daughters new Jr Dragster, She got a few test runs in it and now it`s time for a really cool paint job
-
February 14, 2005 01:41 AM By Rods n Customs by Leon
Scott decided to bring his car in to get refreshed with a little touch up paint work, I really like the color combos on this one
-
February 14, 2005 01:36 AM By Rods n Customs by Leon
On this Truck we will be shaving off everything, Installing Roll Pans, Lights, smoothing seams, Vintage Air Sure Fit Kit, Paint and detail the motor and do a Sleak two tone Paint Job. This is going to be a very Nice Truck.
As soon as I get time I will u
-
February 08, 2005 03:42 PM By jdewey
Greg has stripped down the truck himself. He cut off the cab roof and replaced it with a good rust-free one. We are going to do the body work on the truck for him.
-
January 22, 2005 01:12 AM By Rods n Customs by Leon
In building and working on cars for everyone else, It`s sometimes hard to get time to work on my own, I started this project about two years ago and it got shoved aside for a while, Well it`s time for me to get back on it.
I have always considered the 6
-
January 22, 2005 12:32 AM By Rods n Customs by Leon
The is 72 Chevy truck, It has a few small dents and some bad spots comming up under the simi recent paintjob. This truck is up for a major make over.
This is a list of the mods that you will be able to watch me do as this project proceeds. Frt & Rear Ro
-
January 20, 2005 04:39 PM By BigAlBre
While I wasn't present while, The Hot Rod Shop, installed the Stainless Works exhaust system.... John did get pictures. A big thanks to Al Noel at Stainless Works, John Hendershot and Steve at the Hot Rod Shop. I love the exhaust system.... it has a
-
March 27, 2005 11:29 PM By Rods n Customs by Leon
OK It`s time to start the makeover. This car belongs to my Mom, It has a very long history in everything from an ISCA Championship/ World of wheels tour as a feture, Magazine fetures and then it went on to be driven to countless runs all over the U.S. thi
-
December 18, 2004 11:05 AM By Rods n Customs by Leon
This is Johns 66 Chevelle,Some of you may have seen other post as the paint job was done, Now its time to assemble up everything
-
December 18, 2004 12:36 AM By Rods n Customs by Leon
Now that we have the cage all in place and the new Fatmans clip, Its time to just do a basic mockup to make sure everything fits like it should. Als we will now design how our stearing is going to go. As you can see the 572 fitf perfect
-
December 18, 2004 12:23 AM By Rods n Customs by Leon
OK the Ranchero is now done and has hit the road to be a dailey driver
