General Discussions
-
March 04, 2013 06:05 PM By 1karnutI know this has been answered before but I couldnt locate the topic using the search program. So here is the question agin. What oil to use in a flat tappet crate motor. I remerber some suggested Rotella and some said synthic I would rather stay a way from synthic and use Rotello. What designation on the can should I look for? All say heavy duty. Thanks !karnut
-
March 04, 2013 03:12 PM By 36sedanAutozone sells replacement convex mirror stock at a very reasonable price, their smallest size was more than enough to do my 2" x 5" mirrors at a cost of only $12.99. I made a pattern of the existing mirrors out of flat rubber, making the pattern 1/16 smaller than the existing mirrors. I used a paper mask to locate the best areas on the convex mirror glass, applied the pattern on the mirror (the rubber lays nicely on the convex mirror glass) and ran a simple glass cutter around the pattern to ... Read All ...
-
March 03, 2013 06:50 PM By MACS32I will tell the story about things that are sold as universal fit at LARS - should be good for a laugh at my expense What I need is a measurement off a 59 or 60 chev car - Run the tap in front of the engine at the bottom of heads from inner wheel well to inner wheel well on the other side - Hope some one has a land yacht laying around thanks mac
-
March 03, 2013 02:03 PM By ylchild
-
March 03, 2013 02:00 PM By ptrowCan I change a 1954 lincoln from a 12 volt pos. ground over to a 12 neg. ground so I can install a 2004 4.6 motor?
-
March 03, 2013 09:02 AM By dixieOk its 4:45 in the am getting ready to head out to orlando,waiting on Leroy.Let ya'll know how the show turns out,never been to a VSRA event.Suppose to b kinda cool today 60s to 70 { eat your heart out snow people }. DIXIE------BEATIFUL DADE CITY FL {{ WARM }}
-
March 01, 2013 06:27 PM By whipsold39I have a 1996 chevy tune port motor with an inline electric fuel pump and the pump is extreamly noisey. It is rubber mounted. I plan on replacing it with a WALBRO GSL392 pump. Would this be the right pump to use or is their a better and quieter pump available as I don't want to go through the hassle of putting one in the tank. THANKS in advance for your help and thoughts. WHIP
-
March 01, 2013 05:40 AM By blade58Applying clear on Engine Turned aluminum dash insert ,what type of clear, any special prep without damaging the look?
-
February 27, 2013 11:36 PM By scottsrods
-
February 25, 2013 02:04 PM By wkendsI have been watching or going to nascar races since the early 70's, just wonder if any of you have that same interest.
-
February 23, 2013 10:21 PM By whipsold39Can a VDO fuel gauge be used with the exsisting sending unit in the tank, Besides a ground problem what else would make the gauge peg out to over full. Is their a way to bench test the gauge and sender. THANKS WHIP
-
February 23, 2013 05:54 PM By SANREMOX5HOTMAILCOMI am moving to the Big Island and I want to take my 1950 Chevy p/u.I am a little worried about the rust taking over and how to stop it before it starts. If you live there and have the easy answer I'd like to hear about it. Mahalo
-
February 23, 2013 07:55 AM By BigAlBreI would like to track down this car if anyone has any information please contact Big Al 727-452-4814.... thanks
-
February 22, 2013 04:25 PM By Willys33Have to make new hood sides for the Willys. Question is, should they have louvers, some other kind of vent or just smooth? The engine compartment is kinda small but I have had no problems in the past with overheating.
-
February 21, 2013 12:49 AM By bobsmanstuffMy 46 fleetmaster has stock 16'' rims with wide whites. For better handling I want to go to a 15'' smoothie with wide whites. The car has a stock front end. Does anyone know what size rims and tires I can put on without interferance?
-
February 20, 2013 06:34 AM By da34guyCouldn't wait - The little 205's on the back weren't cuttin it 4 me, neither were the all chrome rims. Solution --- slapped a set of 235/75's on 15x8's on the rear I had layin around, and painted the centers on the front wheels 2 match
-
February 19, 2013 07:59 AM By da34guy
-
February 18, 2013 12:55 PM By 29robertI know it's still 5 months away, but I wanted to get some information out to those who will be participating in this year's event. Local rooms are going quickly, but I have a block of 12 rooms (6 single & 6 double) set aside at the San Dimas Red Roof Inn for arrival on Wednesday, June 12 and departing on Sunday, June 16. They gave me the same rate as last year of $62.99 + tax. Each of you needs to call the Red Roof Inn @ (909) 599-2362 to reserve your own room under the "Greybeards" with yo ... Read All ...
-
February 16, 2013 04:39 PM By da34guyAfter my last comment to him, then Ray (Scooting) made a comment and POOF ____ He deleted all his post. Kinda figured he'd go away pretty quick, maybe he ran outta whiskey !!!!!!!!!!
-
February 15, 2013 11:20 AM By joseph66Does anyone ever sell any vehicles on this site..........seems like 99% of the rides here are over priced............
